System DELTA 30 - Modular furnishing system–Fume cupboard systems - experiment well in safety (for sure)
One of the most important pieces of safety equipment in laboratories is the fume cupboard.
In order to fulfill the protective function, and thus the maintenance of occupational safety, the exhaust air volume flow is a decisive criterion. The retention of pollutants inside the fume cupboard and the resistance to external air currents that can interfere with the fume cupboard is highly dependent on the extraction volume. The further the sash is opened, the more the retention capacity of the fume cupboard is impaired.
Based on these considerations, DIN EN 14175 requires not only the static, but also the dynamic behavior in the “robustness test” as proof. This simulates a disturbing movement in the room, in order to be able to evaluate the stability of the inflow and the retention potential of the fume cupboard. The DELTA 30 fume cupboards, with the extensive range of variants, meet the requirements of the DIN EN 14175 in in full with the best values. The exhaust system has optimized suction zones in the rear wall, which are easily disassembled for cleaning purposes, ensuring ideal air flow and ventilation. The interior of the fume cupboard is extensively usable. There are no disturbing built-in components. Optimal usage and maximum occupational safety – the evaluation factors for our fume cupboards.
Product advantages
Fume cupboard tested and certified in accordance with DIN EN 14175
Optimized contamination retention capacity with simultaneously low exhaust air flow rates
Worktop and interior surfaces as required
Maximum usable interior space due to narrow sides
Worktop with preformed, flow-optimized front rim
Exhaust air system for a full-surface extraction over the worktop
Ergonomically-designed sash handle bar
Easy, one-handed operation of the sash window with twist-release mechanism
Maintenance-friendly due to large inspection panel and easy-to dismantle fittings
Module with splash protection
Electric panels on both sides of the interior
High installation density possible, no overlapping of the media and stand levels
Standard battery-backed exhaust air monitoring unit
Function indicator integrated in pilaster strip. Stand rod holder on the rear wall
Extensive accessories, such as automatic sliding window drive - Optional: substructure or hazardous substances cabinet
Optional: Sash with 3 / 4 cross slides
Optional: Internal sockets with external switching - Optional : Substructure with cabinet or hazardous substances cabinet
Optional: Exhaust air control 2820 mm OK-suction nozzle
Optional: Drip cup
Variant: Fume cupboard for high thermal loads in accordance with DIN EN 14175-7
Variant: Total depth 1070 mm, usable depth 870 mm instead of 710 mm
Variant: Protect technology with active air injection system
Note: Separate types of fume cupboards are available for high thermal loads with acid digestions and the handling of unsealed radioactive substances
Here you can download our product datasheet
(PDF, 1 MB)